AEON LABS Z STICK SERIAL API HOW TO

You can learn how to use Backup Software here to backup, and restore: You can download the installation setup for Backup Software here: This way you will never have to re-do your network if there are catastrophic issues. You are able to backup the Z-Stick Gen5 using our Z-Stick Gen5 Backup Software in any case you need to restore an older save of your network, or replace a failed Z-Stick Gen5. You can find all known third party softwares in this link: In order to use the Z-Stick Gen5 and control your Z-Wave network, you must download a third party software to have full control over your software. Repeat step 2 for each device you wish to exclude. The orange LED will then return to blink fast, indicating readiness for further device exclusions. (The blue LED on Z-Stick will immediately stay solid for 2 seconds to indicate successful removal from the network.)Р”Р€. To remove a Z-Wave device from the network, simply go to the device with Z-Stick and press the button on the device you wish to remove. Then press and hold down the Action Button for approximately 2 seconds.

To initiate Removal-Mode, unplug Z-Stick from the USB connector. Removal-Mode: Deleting/ Removing/Excluding Z-Wave Devices from the Z-Wave Network.Р”РЋ. Tap Z-StickРІР‚в„ўs Action Button to turn it off or it will automatically exit the removal mode after 30 seconds of inactivity.

Repeat step 2 for each device you wish to include.Р”В¤. The blue LED will then return to blinking slowly, indicating readiness for further device inclusions. (The blue LED on Z-Stick will blink fast during a network neighbour discovery and stay solid for 2 seconds to indicate successful inclusion of the device into the network.)Р”Р€. To include a new Z-Wave device into the network, simply go to the device with Z-Stick and press the button on the device you wish to include. To initiate Inclusion-Mode, unplug Z-Stick from the USB connector and then tap the Action Button. Inclusion-Mode: Adding/Including Z-Wave Devices into the Z-Wave Network.Р”РЋ. We recommend free software Domoticz if you are just getting started, you can view this guide here: Z-Stick Gen5 and how to get started with Domoticz. To quickly get started, please follow our Z-Stick Gen5 Quick Start - Just the essentials article.

AEON LABS Z STICK SERIAL API DRIVERS

Software drivers for the РІР‚СљZW050x_USB_VCP_ PC_DriverРІР‚Сњ may need to be installed in order for Z-Stick to be recognized on some computers. Both Inclusion-Mode and Removal-Mode require Z-Stick to be unplugged from the USB connector of the host, while SerialAPI-Mode requires that Z-Stick to be plugged into the USB connector of the host. Z-Stick operates in three distinct modes: Inclusion-Mode, Removal- Mode and SerialAPI-Mode.

Aeon labs z-stick serial api